|
|
|
Model: 300 VP
Stock No: ue_TAKB297.45
Serial No: ue_A8842-A3
Mfg: Lee Industries Inc.
|
|
Used Lee Industries Inc. Stainless Steel Jacketed Vacuum Pan Evaporator. Model: 300 VP. Approximate capacity: 550 gallons. 56 inch. Dia. x 33 in. straight wall. Maximum design pressure, internal: F.V.[0 psi] at 300°F, jacket: 90 psi at 332°F. Approximately 1/3 of the lower region is jacketed, [188 gallon capacity]. As vacuum conditions are induced by design, evaporation can be accomplished at a more efficient, high rate, thus protecting sensitive products susceptible to damage caused by higher temperature, atmospheric boiling. Applications include jams and jellies, or other concentrations such as meat broths and sauces. [1] 18 in. manhole. [2] 3 in. sprayballs. [1] 10-1/2 in. top flange dia. 12 mounting holes 7/8 in dia. 3-1/2 in. adjacent, 14-1/4 in. opposite. [2] 3 in. s-line input. [1] 1-1/2 in. s-line input. [1] 1-1/2 in. MNPT input. [1] 1 in. MNPT input. [1] 3 in. input hole. [1] 3 in. s-line output ball valve. [1] 1 in. FNPT. Overall dimensions: 5 ft. 4 in. L. x 4 ft. 9 in. W. x 10 ft. 3 in. H.[ACN500].
|
|
Click here for more information (pdf - 307.4 KB)
|
|
|
|
Model: Convap / Contherm 6x4
Stock No: ue_SHCA997.18
Serial No: ue_986NCC
Mfg: Alfa Laval
|
|
Used Alfa Laval Convap / Contherm. Model: 6 x 4. Heating surface area: 4 square feet. Approximate separator volume: 35 gallons. Inside separator dimensions: 2 feet 11-5/8 inches straight wall x 1 foot 4-1/2 inches diameter. Overall separator length: 4 feet 9-1/4 inches. Toshiba induction motor, 5 hp, 1715 rpm, 230/460 V, 13.0/6.5 A, 60 Hz, 3 Phase. Pulley dia: [1] 5-1/4 inch driver, [1] 1 foot 5 inch driven. [2] Square D starters. [1] Square D on/off control box. [1] SIHI liquid ring high performance vacuum pump. Model: LOHB 2704 BN 001 01 2. S/N: 2894 151.Capacity: 27 inch Hg @ 25 cfm [using dry air]. Westinghouse motor: 3 hp, 1730 rpm, 230/460 V, 9.4/4.7 A, 60 Hz, 3 Phase. [1] Waukesha positive displacement pump. Model: 018. S/N: 243078. Motor: 2 hp, 1720 rpm, 230/460 V, 6/3 A, 60 Hz, 3 phase. [2] 3-1/2 inch rotors. Gear drive: 1720 rpm in, 254 final rpm, 6.78 Ratio. [1] American Standard shell and tube heat exchanger. Part no. 5-160-08-024-004. Approximate heating transfer surface area: 38 square feet. Pressure tested unit to 100 psi and passed. Inside shell: 105 tubes on each pass, total of 210 tubes. Inside diameter of tubes: 0.350 inch. Tubes length: 2 feet. [1] Hydraulic pump with motor: ½ Hp, 1725 rpm, 230/460 V, 1.6/.8 A, 60 Hz, 3 phase. Inlets/outlets: [2] 3 inch S-line, [1] 1-1/2 inch inner diameter. FNPT, [2] 2-5/8 inch inner diameter. FNPT, [1] ½ inch FNPT, [1] 1 inch FNPT, [1] 1-1/2 inch S-line, [1] 3 inch I-line. The CONVAP [a modified CONTHERM] functions as a compact, scraped-surface evaporator. It is vertically mounted and particularly suited for concentrating viscous, sticky or heat sensitive products and is normally operated under vacuum conditions in the final evaporation stage to achieve very high concentrations of solids. Wide ranges of process stages include: heating, cooling, slush-freezing, pasteurization, sterilization and crystallization. The Contherm can operate with steam, water, brine ammonia, glycol, R22, R12, thermal oil or liquid gases. Overall dimensions: 5 feet 5 inches L x 4 feet 5-1/4 inches W x 8 feet 8 inches H.[ACN710].
|
|
Click here for more information (pdf - 750.2 KB)
|
|
|
|
Model: LTFL
Stock No: ue_185.CI03.30
Serial No: ue_42
Mfg: Mojonnier
|
|
Used Mojonnier Lo-Temp Evaporator. Model: LTFL. Includes: Separator [jacketed]: 1 foot 4-1/2 inches straight wall. Collection glass: 1 foot L x 6-1/2 inches diameter. Inlets/outlets: [1] 2 inch S-line, [1] 4-5/8 inch sight glass, [1] 1-3/4 inch sight glass. Overall height is 6 feet 6-1/2 inches. Condenser: collection glass: 1 f t L x 6-1/2 inches diameter. Outlet: [1] 1-3/4 inch sight glass. Overall height is 5 feet 10-1/2 inches. Pumps include: Waukesha 18 positive displacement pump, model: 18. Flow rate for new pump is 17 gpm with required horsepower and pressure. Reliance electric motor: 1 Hp, 1725 Rpm, 208-230/460 V, 3.4-3.4/1.7 A, 60 Hz, 3 Phase. Dodge Master XL speed reducer: 2.23 max input Hp, 1750 input rpm, 324 Cap. In. lbs., 4 to 1 ratio. Beach-Russ Co. Rotary Pump. No. 110-20/C. Motor specifications: 1 hp, 1800 rpm, 230 V, 1.8 amps. Centrifugal pump. Impeller diameter: 3-7/8 inches. Leeson electric motor, 1 hp, 1725 rpm, 115/208-230 V, 12.8/6.5 amps, 60 Hz, single phase. Inlets/Outlets: [2] 1-1/2 inch diameter S-line fitting. This Mojonnier low temperature evaporator heats sensitive products at very low temperatures and is capable of evaporating at room temperature using both remote, hot and cold water sources. The evaporation rate increases as product temperature is raised. In this design, chilled water must be run through the condenser in order to help condense the vapor from the separator. This system is intended to work in a manual mode in that the product is introduced and removed manually, and condensate is removed manually. Pumps are also started manually. Inlets: [2] 1/2 inch diameter infeed [product], [1] 1/4 inch diameter FNPT [steam]. Outlets: [1] 1/2 inch diameter port [condensate], [1] 3/4 inch diameter port [vapor], [2] 1-1/2 inch diameter ports [product]. Overall dimensions: 5 feet 10 inches L x 3 feet 8 inches W x 6 feet 10-1/2 inches H.
|
|
Click here flow diagram (pdf - 49.1 KB)
Click here for more information (pdf - 266.4 KB)
|
|
|
|
Model:
Stock No: ue_2500.CI01D.
Serial No: ue_38312
Mfg: Croll Reynolds Company
|
|
Used Croll Reynolds Company Vertical Condenser- 960 Gallon. Serial Number: 38312. Type: Spec.36"B Condenser. Inside dimensions: 3 feet diameter x 18 feet 4 inches height. Mat’l construction: carbon steel. Ladder dimensions: 12 feet 2 inches H, number of steps: 9, distance between steps: 1 feet Platform dimensions: 2 feet 10 inches length x 2 feet 6 inches W, distance from ground: 17 feet Inlets: [1] 6 inches diameter flanged port, [1] 8 inches diameter flanged port, [1] 4 inches diameter flanged port, [2] 1 inches diameter FNPT fittings, [1] 3 inches diameter flanged port, [1] 3/4 inches diameter FNPT, [1] 1 feet 8-1/2 inches diameter flanged port. Outlets: [1] 9 inches diameter flanged port, [1] 1 inches diameter FNPT. Overall dimensions: 6 feet 5 inches length x 6 feet 3 inches width x 22 feet height.
|
|
Click here for more information (pdf - 288.2 KB)
|
|
|
|
Model: Eldorado
Stock No: ue_AACA2052.100
Serial No: ue_3361, 3362 and 90573
Mfg: Rossi & Catelli
|
|
|
|
Model: Eldorado
Stock No: ue_AACA2053.105
Serial No: ue_3314, 3315 and 90569
Mfg: Rossi & Catelli
|
|
Used 1990 Rossi & Catelli Hot Break Enzyme Deactivator. Heat exchanger ratings: 61.2 PSI @ 308º F. Inlet / outlets: 12 inches ID, 3-1/2 inches ID, 3 inches ID, 2 inches ID, 1 inch ball valve. Vacuum tank: Approximate capacity: 800 gallons. Straight wall: 59 inches, Diameter: 61 inches, tank inlet / outlets: bottom 19-1/2 inches, side 12 inches, top 3-1/2 inches. Unit features: 18 inch Manway and sprayball, and continuous production runs lasting several weeks, the results being highly viscous juices and concentrates with preserved product quality, color and natural characteristics, unaltered. Overall heat exchanger dimensions: 26 feet 11 inches L x 30 inches W x 4 feet H. Overall vacuum tank dimensions: 5 feet 9 inches L x 6 feet 5-1/2 inches W x 11 feet 1 inch H.{hb1}
|
|
Click here for more information (pdf - 1,014.0 KB)
|
|
|
|
Model: SR35
Stock No: ue_CHNK001.
Serial No: ue_30635.1.W.O: 30635-1
Mfg: APV
|
|
Used 1995 APV Titanium and Monel Paravap Plate Evaporator. Model: SR35. Serial Number: 30635.1.W.O: 30635-1. Nat'l Bd: 6629. Number of titanium plates: 46. Heat transfer surface area: approx. 192 square feet Number of dividers: 1. MAWP: 150 psig @ 300 °F. MDMT: -20 °F @ 150 psig. Inlets/outlets: [8] 3 inches diameter flanged ports. 1,070 pounds per hour water evaporation per hour. Running at full capacity when shut down in January of 2006.
|
|
Click here for more information (pdf - 965.8 KB)
Click here for P&I Diagram (JPG - 5,481.9 KB)
|
|
|
|
Model: 185, 208
Stock No: ue_RAAF112.210
Serial No: ue_28493, 10351
Mfg: APV
|
|
Used APV 2-Effect Plate Evaporator. First effect model: 185. Number of plates: 60. Approximate effective heat transfer area: 371 sq. ft. First effect stainless steel separator: 200 gallon approximate capacity, working vacuum: 26.5 in., test vacuum: full. Second Effect, Model: 208. Number of plates: 124. Approximate effective heat transfer area: 767 sq. ft. Second effect stainless steel separator: 800 gallon approximate capacity, working vacuum: 26.5 in., test vacuum: full. Also included: stainless steel ParaFlow heat exchanger. section 1: number of plates: 49. Heat transfer area: 87 sq. ft. Section 2: number of plates: 19. Heat transfer area: 33 sq. ft. Stainless steel balance tank with capacity: 40 gallons, condenser unit: 190 gallon capacity, control panel with a small, Pro Controls Inc. evaporator steam controller, centrifugal pump on base with accumulation tank, and inter-connecting pumps to include: [6] APV centrifugal pumps, models: W20/50 and W30/50, [1] Coker centrifugal pump, model: 2000. [1] Worthington D-Line® centrifugal pump, model no. D1021, [1] Berkeley centrifugal pump, model no. B3ZPLS and [1] SIHI pump, model no. LPHA 4616 BN041010.[h12/17].
|
|
Click here for more information (pdf - 1,971.1 KB)
|
|
|
|
Model: FFPE
Stock No: ue_HDDF148.91a
Serial No: ue_173
Mfg: APV
|
|
Used APV Single Effect Falling Film Plate Evaporator. Model: FFPE. Serial Number: 173. Last running 3-A milk products. System includes APV Falling Film Plate Evaporator, APV Horizontal Separator, and 332 square feet Stainless Steel Condenser. Can be re-configured to customers individual needs. Overall system dimensions: 17 feet 10 inches length x 14 feet 11 inches width x 9 feet 8 inches height.{h12}.
|
|
Click here for more information (pdf - 1,096.3 KB)
|
|
|
|
Model:
Stock No: ue_HDDF150.68a
Serial No: ue_1421962
Mfg: C.E. Rogers
|
|
Used CE Rogers Stainless Steel Box Spray Dryer. Serial Number 1421962. Former application: 1,600 pounds per hour dairy product. Unit includes stainless steel product contacts, programmable Magelis controls, stainless steel cyclone separator, stainless steel sifter, 30 horse power blower, and 316 SS rotary air lock. New dryer box walls must be fabricated on-site.(H13).
|
|
Click here for more information (pdf - 1,859.5 KB)
Click here for drawing (pdf - 315.7 KB)
|
|
|
|
Model: P-E
Stock No: ue_2500.CI01C.
Serial No: ue_1247 and 1248
Mfg: APV
|
|
Used APV Two Effect Rising/Falling Film Plate Evaporator. Model: P-E. Serial Number: 1247 and 1248. All product contact surfaces are 316 stainless steel including heat exchanger plates, vapor separators, pumps, vapor and product tubing. Inlets: [2] 2 inches diameter ACME fittings [product], [1] 4 inches width x 30 inches height steam port. Outlets: [1] 2 inches diameter condensate port, [1] 21 inches width x 10 ½ inches height vapor port. Overall dimensions: 5 feet 8 inches length x 2 feet 11 inches width x 8 feet 7 inches height. Second Effect Horizontal Separator -125 Gallon. Serial Number: 20427, vacuum: 28.54 inches Hg. Inlets: [1] 2 inches diameter port [sprayball], [1] 21 inches width x 10 ½ inches height vapor port. Outlets: [1] 4 inches diameter ACME fitting, [1] 10 inches diameter vapor pipe. Overall dimensions: 5 feet length x 4 feet 5 inches width x 6 feet 6 inches height.
|
|
Click here for more information (pdf - 420.3 KB)
|
|
|
|
Model: P-E
Stock No: ue_2500.CI01B.
Serial No: ue_1247
Mfg: APV
|
|
Used APV Single Effect Rising / Falling Film Plate Evaporator. Model: P-E. Serial Number: 1247. All product contact surfaces are 316 stainless steel including heat exchanger plates, vapor separators, pumps, vapor and product tubing. This system was last running citrus juices and will be able to run most other types of juice or liquid products. Inlets: [2] 2 inches diameter ACME fittings [product], [1] 4 inches width x 30 inches height steam port. Outlets: [1] 2 inches diameter condensate port, [1] 21 inches width x 10 ½ inches height vapor port. Overall dimensions: 7 feet length x 2 feet 11 inches width x 8 feet height. First Effect Horizontal Separator - 500 Gallon. Serial Number: 20423, vacuum: 28.54 inches Hg. Inlets: [1] 1 ½ inches diameter S-line fitting [sprayball], [1] 21 inches width x 10 ½ inches height vapor port. Outlets: [1] 4 inches diameter ACME fitting, [1] 15 inches diameter vapor pipe. Overall dimensions: 6 feet 9 inches length x 4 feet 8 inches height x 7 feet 1 inches height.
|
|
Click here for more information (pdf - 492.9 KB)
|
|
|
|
Model: FFPE
Stock No: ue_RCCB294.
Serial No: ue_102
Mfg: APV
|
|
|
|
Model:
Stock No: ue_2500.PF1a
Serial No: ue_
Mfg: APV
|
|
Used Got an evaporation duty requiring exotic metals? Need a short delivery time for a system? Maybe you have salty brine or other product requiring exotic materials. Here is an APV Three Effect evaporator, with Alloy 20 vapor vessels and ducting and with Titanium heat exchanger surfaces [plates] in the 1st effect and Carpenter 20 heat exchanger surfaces [plates] in the next two effects. The feed preheater is a heat exchanger with Incolloy 825 plates. All product contact pumps are Alloy 20. It has a dual TVR's that will allow this evaporator to be easily turned down to lower feed and evaporation rates while maintaining efficiency. It can be configured to run 20,000 pounds per hour or more of evaporation, or can be configured for much less pounds per hour. Used Evaporators can help configure this system to a customer's specific application and desired efficiency rate.{H12}.
|
|
Click here for Evaporator Drawings (pdf - 1,968.6 KB)
Click here for more information (pdf - 199.3 KB)
|
|
|
|
Model:
Stock No: ue_DTTC2108.
Serial No: ue_
Mfg: Spirax Sarco
|
|
Used Spirax Sarco Condensate Recovery System. Condensate receiver- 40 gal. Inside straight-wall dimensions: 1 feet 4 inches diameter x 4 feet L. Spirax Sarco Pressure Powered Pump, Size: 2x3, B.M: 69422, PMA: 150 psig [10.3 barg], PMO: 125 psig [8.6 barg], TMA: 450°F [343.4°C]. Taylor Valve, Serial Number: 2742-1, P/N: 211SD12000107, size: 1/2, set pressure: 100 psig, capacity: 640 lb per hour, range: 92-114. Inlets: [2] 1 inches diameter ports, [1] 3/4 inches diameter port. Outlets: [1] 1-1/2 inches diameter port, [1] 1 inches diameter port, [1] 3/4 inches diameter FNPT fitting. Overall dimensions: 5 feet 7 inches length x 3 feet 7 inches width x 7 feet 4 inches height.[hb2].
|
|
Click here for more information (pdf - 340.0 KB)
|
|
|
|
Model:
Stock No: ue_ENDX956.86
Serial No: ue_
Mfg: APV
|
|
Used APV 3 Effect Rising Falling Film Plate Evaporator with Horizontal Vapor Separators. All product surfaces are 304 or 316 SS. Equipped with a horizontal tubular surface condenser and all product, condensate and vacuum pumps. Feed Balance Tank and Plate type preheater
This is a very flexible and reliable system that can run food and heat sensitive types of products. It can run other products requiring SS contact surfaces. Original Feed Rate 15,854 pounds per hour @ 9% solids. Original evaporation rate 13,000 pounds per hour of water. Concentrated Product Rate 2853 pounds per hour @ 50% solids.[H12].
|
|
Click here for more information (pdf - 630.3 KB)
|
|
|
|
Model:
Stock No: ue_HDBA120.14
Serial No: ue_
Mfg: Mojonnier
|
|
Used Mojonnier Stainless Steel Vacuum Pan Evaporator- 1,300 Gallons. Size: 48 399. 316 stainless steel. [2] manways: 16 inches diameter [1] Sight glass: 4-1/2 inches diameter Inlets/outlets: [1] 1/2 inches diameter female ferrule, [1] 1 inches diameter male ferrule with hex nut, [1] 1 inches diameter pipe, [1] 1-1/2 inches diameter male ferrule with hex nut, [1] 1-1/2 inches diameter threaded fitting, [1] 2 inches diameter threaded fitting, [1] 2 inches diameter male ferrule with hex nut, [5] 2 inches diameter FPT, [1] 5 inches diameter with a 10 inches diameter flange and [8] 3/4 inches diameter attachment holes. Overall dimensions: 56 inches length x 54 inches width x 17 feet 4 inches height.
|
|
Click here for more information (pdf - 94.1 KB)
|
|
|
|
Model:
Stock No: ue_NOI9014
Serial No: ue_
Mfg: Not Specified
|
|
Used Stainless Steel Paraflash Separator. Approximate volume: 59 cubic feet. Inside dimensions: 41-3/4 inch diameter x 5 feet 1 inch straight wall. [2] 4 inch sight glass windows. [1] 3 inch stainless steel sprayball. Inlets/outlets: [1] 1 feet 6 inch diameter manway port. [1] 9-3/4 inch flange diameter [12] 1 inch mounting holes, 3-5/8 inch adjacent, 1 feet 2-1/4 inch opposite. [1] 4 inch flange diameter [8] ¾ inch mounting holes, 2-3/4 inch adjacent, 7-1/2 inch opposite. [1] 2 inch FNPT. [1] 1-1/2 inch port. [1] ¾ inch FNPT. [1] 3/8 inch MNPT. Overall dimensions: 6 feet 1 inch Long x 5 feet 5-1/4 inch Wide x 12 feet 7 inch Height.[GF]
|
|
Click here for more information (pdf - 275.0 KB)
|
|
|
|
Model:
Stock No: ue_OI244.
Serial No: ue_
Mfg: Not Specified
|
|
Used Stainless Steel Batch Evaporator/Separator. Maximum tank capacity: 8 gal. Mixing head diameter: 7-1/2 inches Mixer Motor, 3/4 horse power, 220 V, 2.25 amps, 60 Hz, 3 phase. Fryma-Maschinen Progressing Cavity Positive Displacement Pump, Model: NU-15A. Motor, 1/2 horse power, 1100 rpm, 380 V, 1.4 amps, 60 Hz, 3 phase. Siemen and Hinsch Vacuum Pump with Motor, Model: LEMA 25 A7 GA1 7C0, Serial Number: D-3126498. Inlets: [1] 3/8 inches diameter vacuum port, [1] 1/2 inches diameter MPT, [1] 1 inches diameter flanged port. Outlets: [1] 1-1/2 inches diameter port. Overall dimensions: 54 inches length x 22 inches width x 52 inches height.
|
|
Click here for more information (pdf - 344.4 KB)
|
|
|
|
Model:
Stock No: ue_RAAF111.330
Serial No: ue_
Mfg: APV
|
|
Used APV 3 Effect Rising Falling Film Plate Evaporator with Horizontal Vapor Separators. All product surfaces are 304 or 316 SS. Equipped with a verticle condenser, feed balance tank, plate-type preheater, and all product, condensate and vacuum pumps. This is a very flexible and reliable system that can run both food products and heat-sensitive non-food products requiring stainless steel contact surfaces. This is a modular system with a very adaptable feed and evaporation rate for many applications.{h12}.
|
|
Click here for more information (pdf - 3,302.7 KB)
|
|
|
|
Model:
Stock No: ue_WSAT001.75
Serial No: ue_
Mfg: Enders Process Equipment Corp.
|
|
Used Enders Process Equipment Corp. Two Stage Forced Circulation Tubular Evaporator. Rated at approximately 3,108 pounds per hour water evaporation combined, or 1554 lbs. of water evaporation for each stage, 15psi/14 psi for steam. Supplied to the U.S. Navy for concentrating plating waste. Materials of construction: T-316 stainless steel. Each heating element has [220] 3/4 inch O.D. x 18 Ga. T-316L stainless steel welded tubes 8 feet long. [346 square feet based on outside of tubes] Each condenser has [146] 3/4 inch O.D. x 18 Ga. T-316L SS welded tubes 5 feet long. [142 sq. ft. based on outside of tubes]. Inlets: [1] 1 inch diameter steam supply line, [1] 6 inch diameter tube [condenser]. Outlets: [1] 6 inch diameter tube [condenser]. [2] 1991 Perry Products Corp. shell and tube heat exchangers, Model: 14-143/ETSMX, shell MAWP: 75 psi @ 320 °F [FV], shell MDMT: 20 °F @ 75 psi [FV], tube MAWP: 75 psi @ 320 °F [FV], tube MDMT: 20 °F @ 75 psi [FV]. [2] R.S. Corcoran Co. centrifugal pumps, model: 5000F. Baldor Electric industrial motor, 15 hp, 230/460 V, 39.2/19.5 amps, 60 Hz, 3 phase. Overall dimensions 11 feet L x 6 feet 6 inches W x 12 feet 2 inches H.
|
|
Click here for additional information (pdf - 90.9 KB)
Click here for more information (pdf - 1,084.2 KB)
Click here for drawings (pdf - 2,816.1 KB)
|
|
|
|